Our Products

Chemical Resistant Mortars/ Tiles
RAJBIT Compounds-  Bitumen based material as an underlay for acid proof bricks/tiles stones and mastic lining.Can withstand mild acids, alkalis, salts, bases.
RAJSIL-K Compounds-Potassium silicate based cement. Resistant to all acids including strong oxidising acids and solvents. Excellent under highly acidic conditions. Max. working temperature 800 to 1000 oC.
RAJPHEN Compounds- Phenolic resin based cement. Resistant to non-oxidising acids, many organic solvents, acids,neutral salts. Max working temperature 170 oC
RAJFUR Compounds- Furan resin based cement. Resistant to most non-oxidising acids, alkalis, salts and solvents,valuable for use in the presence of alternating acidic & alkaline conditions. Max. working temperature 170 oC.
RAJCASH Compounds- CNSL resin based cement. Resistant to oxidizing & non-oxidising acids, alkalis and salts,suitable in the presence of alternating acidic & alkaline conditions. Max. working temperature
160 oC.
RAJPOL Compounds- Polyester resin based cement. Resistant to oxidising as well as non- oxidising acids, salts,and some organic solvents. Can withstand alkaline conditions. Max. working temperature 90 oC.
RAJCRYL Compounds- Acrylic polymer based mortar for laying tiles, for floor toppings and patch work for maintenance of shop floors. Floors treated with RAJCRYL Compound are very hardwearing and impact resistant.
RAJGRAPH- Graphite tiles used to line reaction vessels. Excellent resistance to most non-oxidising acids(HF), alkalis, salts and organic solvents. May substitute glass lining. Max. working temperature 170 oC.
GEROCK- Acid proof tiles confirming to IS 4860 / IS 4457. Used in tanks, floor, drains, vessels to resist acid, alkalis and solvents. Limitations in HF.
acid-alkali-resistant-tiles-500x500
a-r-tile-lining-250x250
acid-resistant-tiles-250x250
HIGH PERFORMANCE CHEMICAL RESISTANT MONOLITHIC LININGS
GEFLOR EP CR ( Variants- GEFLOR EP CR TC / FC)- Solvent free epoxy based compound for resistance to heavy duty chemicals – acids, alkalis.Excellent mechanical strength. Maximum working temperature 90º C. Applied as coatings, screeds linings, fiber reinforced linings and tile mortar. Also suitable for potable water tanks.
GEFLOR EP CR HT TC- High performance pigmented novolac epoxy based coating with higher temperature resistance and resistant to heavy duty chemicals – acids, alkalis in immersion conditions. Recommended for internal coating of tanks and RCC structures.
GESTONE- Composite system with excellent mechanical & chemical resistance. Including resistance to oxidizing acids, bleaching chemicals. Max working temperature 100º C.
GEFLOR EP CTE- Coal tar epoxy based compound for resistance to chemicals – mild acids, alkalis and sea water. Good mechanical strength. Applied as coatings, screeds linings, fiber reinforced linings and tile mortar.
GEFLOR PPGL- Chemical resistant lining system particularly for use in D.M water plants. It is best suitable for concrete surfaces and plant floors with low mechanical movement and exposure to chemicals.
RAJPOL FRP Lining- Fibre reinforced coatings based on bis-phenol / vinyl ester resin composite system with excellent mechanical & chemical resistance. Including resistance to oxidizing acids, bleaching chemicals. Max working temperature 120º C.
IMG-20150807-WA0011
fetilizer tank inside liner after
IMG-20150801-WA0015
MULTI USE EPOXY
 GEFLOR EP G- Multiuse purpose solvent free epoxy compound for protective coatings, floor mortars,groutings, crack fillings, bonding of old to new concrete, waterproofing, etc. Excellent bond strength and mechanical strength.
GEFLOR EP S- Low viscosity epoxy based coating used as a primer for protective coatings, bonding of old to new concrete, waterproofing, etc. Excellent bond strength and penetrating properties.
GECONSEAL EP- Low viscosity epoxy based clear concrete sealant, for making concrete floors and structures impermeable, giving dustfree properties at low cost.
epoxy floor coatng of production area
Clean Room Epoxy / Polyurethane Floor Coatings
GEFLOR EP SL-
Epoxy based self leveling system for 1 to 3 mm coatings. Excellent gloss, UV resistance and aesthetic appeal. High mechanical strength and moderate chemical resistance. Recommended for food, pharmaceuticals, electronics industries.
GEFLOR EP FC-
Low viscosity, epoxy floor paint for thin coatings. Excellent mechanical and abrasion resistance with excellent gloss, UV resistance & aesthetic appeal. Recommended for godowns, car parks, engineering industry.
GEFLOR PU SL-
Polyurethane based self leveling system for 1-2 mm coatings. Good gloss, UV resistance,aesthetic appeal and chemical resistance. Excellent abrasion resistance. Recommended for food, pharmaceuticals, electronics etc.
GEFLOR PU FC-
Low viscosity, polyurethane floor paint for thin coatings. Excellent mechanical and abrasion resistance with good gloss, UV resistance & aesthetic appeal. Recommended for godowns, car parks, engineering industry and as an over coat to epoxy coatings.
GEFLOR AS SL-
Epoxy based anti static self leveling system for 2-3 mm coatings. Good gloss and
aesthetic appeal. Good mechanical strength.
GAL_1
pu-flooring-solvent-free-self-level-250x250
GAL_4
Clean Room Wall Coatings
GEWALL Plast-
High performance putty for hygienic wall coatings combining excellent finishes, toughness,water resistance and masking. Available variants- epoxy based, cementatious based, acrylic based.
GEWALL EP SB-
Epoxy based interior wall finish for clean room coatings. Wear resistant and tough coating with anti fungal properties. Good chemical resistance.
GEWALL PU SB-
Polyurethane based interior wall finish for clean room coatings. Abrasion resistant, wear resistant, UV resistant and tough coating with anti fungal properties. Good chemical resistance.
GEWALL PU WB-
Hygienic water borne polyurethane based interior wall finish paint with antifungal properties. Abrasion resistant, UV resistant, flexible coating Eco friendly application.
IMG-20160131-WA0016
VLUU L100, M100  / Samsung L100, M100